Vol. XVII, No. 1-2, Pp. 1-82
December 2002
UDC 621.039+614.876:504.06
YU ISSN 1451-3994

Pages: 64-67

Authors: Mahmoud M. Imam, Hassan Roushdy

Abstract

The thermal column in the ET-RR-2 reactor is intended to promote a thermal neutron field of high intensity and purity to be used for following tasks: (a) to provide a thermal neutron flux in the neutron transmutation silicon doping; (b) to provide a thermal flux in the neutron activation analysis position; (c) to provide a thermal neutron flux of high intensity to the head of one of the beam tubes leading to the room specified for boron thermal neutron capture therapy. It was, therefore, necessary to determine the thermal neutron flux at above mentioned positions. In the present work, the neutron flux in the ET-RR-2 reactor system was calculated by applying the three dimensional diffusion depletion code TRITON. According to these calculations, the reactor system is composed of the core, surrounding external irradiation grid, beryllium block, thermal column and the water reflector in the reactor tank next to the tank wall. As a result of these calculations, the thermal neutron fluxes within the thermal column and at irradiation positions within the thermal column were obtained. Aparat from this, the burn up results for the start up core calculated according to the TRITION code were compared with those given by the reactor designer.

Key words: thermal flux, thermal column, diffusion depletion code, reactor system, fuel burn up, start up core

FULL PAPER IN PDF FORMAT (1.32MB)