NT & RP Journal
CALIBRATION OF THE SIMULATION MODEL OF THE VINCY CYCLOTRON MAGNET
......: info......: history......: editorial......: archive......: for authors......: subscription
Vol. XVII, No. 1-2, Pp. 1-82
December 2002
UDC 621.039+614.876:504.06
YU ISSN 1451-3994

....Back to Contents

 



Pages: 13-18

Authors: Sasa Ćirković, Jasna Ristić-Đurović, Alexey S. Vorozhtsov, Serguei B. Vorozhtsov

Abstract

The MERMAID program will be used to isochronise the nominal magnetic field of the VINCY Cyclotron. This program simulates the response, i.e. calculates the magnetic field, of a previously defined model of a magnet. The accuracy of 3D field calculation depends on the density of the grid points in the simulation model grid. The size of the VINCY Cyclotron and the maximum number of grid points in the XY plane limited by MERMAID define the maximum obtainable accuracy of field calculations. Comparisons of the field simulated with maximum obtainable accuracy with the magnetic field measured in the first phase of the VINCY Cyclotron magnetic field measurements campaign has shown that the difference between these two fields is not as small as required. Further decrease of the difference between these fields is obtained by the simulation model calibration, i.e. by adjusting the current through the main coils in the simulation model.

Key words: cyclotron, magnetic field, 3D calculation, MERMAID

FULL PAPER IN PDF FORMAT (2.37MB)

Vinča Institute of Nuclear Sciences :: Designed by milas :: July 2007
Last updated on September, 2010